battery as described below. Some batteries perform best 

after several full charge/discharge cycles. 

Action

1 Plug the travel 

Release

charger into 

Tab

your phone with 

the release tab 

Getti

facing up. Be 

sure to insert 

ng Started

the plug's 

connector hooks 

straight into the 

phone's charge

r slots, so that both hooks 

engage to lock the plug in place.

2 Plug the other end of the travel charger into the 

appropriate electrical outlet.

3 When your phone indicates Charge Complete, press 

the release tab and remove the travel charger.

Note: Upon insertion of the charger plug into the handset, 

the handset will respond with an indication that the battery 

is charging (Battery Icon Flashing and/or Battery Indication 

Tone). If the battery has been deeply discharged or stored 

in a discharged state for an extended period of time, there 

may be a delay of up to 10 seconds before the Battery Icon 

and/or Battery Tone is activated. This is normal operations 

and does not indicate a fault.

Tip: You can safely leave the travel charger connected to 

the phone after charging is complete. This will not damage 

the battery.

19