WARNING

AC power cord must only be changed at qualified service shop.

Precautions

  The set is not disconnected from the AC power source as long as it is connected to the wall outlet,

even if the set itself has been turned off.

  To prevent accident from a short circuit, do not come into contact with the terminal inside the

shutter at the rear of the camcorder.

Notes on the POWER lamp

  The POWER lamp will remain lit for a while even if the unit is unplugged after use. This is normal.

  If the POWER lamp does not light, disconnect the AC power cord. After about one minute, try again.

Using a Car Battery

Use the DC V515/V700 pack (not supplied).  Connect the cord of the DC pack to the cigarette lighter

socket of a car (12 V or 24 V).  Connect the DC pack in the same way as the AC power adaptor.

Use the connecting cord supplied with this camcorder.

Advanced Operations

19