C o n n e c t i v i t y

Creating a new configuration server profile

The configuration server profile contains the settings for the remote server. You can create several profiles if you need to access

multiple servers.

You may receive the configuration server profile settings as a special message from your service provider.

1. If you have no profiles defined, press 

New

, otherwise press Menu, and select 

File

 > 

New

.

2. If you already have profiles defined, choose whether you want to copy the values from an existing profile to be used as the

basis for the new profile.

3. The 

Profile settings

 dialog opens.

Define the following settings on the different pages of the dialog:

Server name

   Type a name for the configuration server.

Server ID

   Type the unique ID to identify the configuration server. Contact your service provider or system administrator

for the correct value.

Password

   Write a password to identify your device to the server. Confirm the password.

Active

   Select 

Yes

 to allow the server to initiate a configuration session.

Accepted

   Select 

Yes

 if you do not want the server to ask for your confirmation when it initiates a configuration session.

Connection type

   Select how you want to connect to the server.

Access point

   Select the access point you want to use for the data connection to the server.

Host address

   Type the URL address of the server. Contact your service provider or system administrator for the correct

value.

Port

   Type the port number of the server. Contact your service provider or system administrator for the correct value.

User name

   Enter your user ID for the configuration server. Contact your service provider or system administrator for

your correct user ID.

Password

   Type your password for the configuration server. Confirm it in the 

Confirm password

 field. Contact your service

provider or system administrator for the correct password.

HTTP authentication

   Select 

Yes

 if you need to send your user name and password to the HTTP server. In the 

HTTP

authentication

 dialog, enter your user name and password, and press 

Done

.

To edit the configuration profile settings, select the profile, and press 

Edit

.

To delete a profile, select the profile, and press the backspace key.

Tip: If you have deleted or modified the predefined PC Suite profile, you can restore it by pressing Menu, and selecting

Tools

 > 

Reset PC Suite profile

.

Data connections

This device supports packet data (GPRS), high speed data calls (HSCSD), and GSM data calls.

Packet data (general packet radio service, GPRS)

GPRS enables wireless access for mobile phones to data networks (network service). GPRS uses packet data technology where

information is sent in short bursts of data over the mobile network. The benefit of sending data in packets is that the network

is occupied only when sending or receiving data. As GPRS uses the network efficiently, it allows for quick data connection set

up and fast data transmission speeds.

You must subscribe to the GPRS service. For availability and subscription to GPRS, contact your network operator or service

provider.

Enhanced GPRS (EGPRS) is similar to GPRS, but it enables faster connection. For more information on the availability of EGPRS

and data transfer speed, contact your network operator or service provider. Note that when you have selected GPRS as a data

bearer, the device uses EGPRS instead of GPRS if this is available in the network.

Note that during a voice call, you cannot establish a GPRS connection, and an existing GPRS connection is put on hold.

High speed data calls (high speed circuit switched data, HSCSD)

HSCSD enables data transmission rates up to 43.2 kb/s, which is four times faster than standard data rates of the GSM network.

HSCSD is comparable to the speed of many computer modems that communicate with fixed telephone networks.

For availability and subscription to high speed data services, please contact your network operator or service provider.

Note that sending data with HSCSD may drain the battery faster than normal voice or data calls, as the device may send data

more frequently to the network.

GSM data calls

A GSM data call enables data transmission rates of up to 14.4 kb/s. For availability and subscription to data services, contact your

network operator or service provider.

Copyright   2005 Nokia. All Rights Reserved.

90